As temperatures start to rise, San Antonio Ac Repair follows. But what do you do if it stops working? A broken air conditioning unit can be a major issue and can drastically reduce the comfort of your home. The first step is to to check a few simple things before you have to call in the professionals.
It is important to note that while you can take a few simple steps to check if your unit is working properly, it is always recommended to have a professional diagnose the issue in order to get to the root of the problem and to ensure your AC unit is operating safely and efficiently.
In this article, we’ll provide a helpful 3-step guide on what to do if your AC unit stops working. We’ll also explain why it is important to have a professional diagnose the issue and provide a call to action to contact Beluga Air for a free diagnosis of your AC unit.
Let’s get started and take a look at the first step you can take to troubleshoot your AC unit.
Step 1: Check the Circuit Breakers San Antonio Ac Repair
When your air conditioning unit stops working, one of the first steps you should take is to check the circuit breakers. Circuit breakers are essentially like a self-resetting fuse and are designed to protect your electrical system from power surges and short circuits. If a circuit breaker is tripped, it can cut off the power to your air conditioner and cause it to stop working.
In order to check the circuit breakers, the first thing you should do is locate the circuit breaker box. This is usually located in the basement, utility room, or garage. Once you have located the box, open it and inspect the circuit breakers inside. Each of the circuit breakers should be in the “on” position.
If one of the circuit breakers is in the “off” position, then this could be the cause of your air conditioning unit not working. To reset the breaker, simply turn the switch to the “on” position and then turn it back to the “off” position. This should reset the breaker and restore power to the air conditioner.
If none of the circuit breakers are in the “off” position, then the issue may be more complicated and you may need a professional to inspect the system.
Step 2: Check the Thermostat
There are several steps you can take to check the thermostat. First, make sure it’s powered on. If the thermostat is off, the air conditioner won’t work. Check the thermostat’s battery and power source. If the battery is low or dead, it won’t be able to communicate with the air conditioner.
Next, make sure the thermostat is set to the right temperature. If it’s set too low, your air conditioner won’t turn on. Check the “fan” setting too. It should be set to “auto” so the fan runs automatically when the air conditioner is on.
You should also check the thermostat’s “mode.” The mode should be set to “cool” if you want your air conditioner to turn on. If the mode is set to “heat,” the air conditioner won’t turn on.
Finally, make sure there’s no debris or other objects blocking the thermostat’s sensors or airflow. Anything blocking the thermostat’s sensors or airflow can prevent the air conditioner from turning on.
Once you’ve checked the thermostat, it’s important to call a professional if the problem persists.
Step 3: Check the Filter
When it comes to your AC unit, one of the most important components is the filter. The filter is responsible for trapping dust, dirt, and other debris to keep them from circulating through your air. It also helps reduce allergens in the air. If your AC unit is not working properly, it’s important to make sure the filter is clean and in good condition.
When checking your AC filter, start by checking for visible damage. Make sure to check if the filter has any torn areas or holes. If it does, you will need to replace it. You should also check for dirt and debris buildup on the filter. If you see any, you should clean the filter with a vacuum or brush.
If the filter looks to be in good condition, but your AC unit is still not working, you may need to replace the filter. When replacing the filter, make sure you have the correct size and type for your unit. You should also make sure the filter is the correct direction so it can properly filter the air.
Once you have the new filter in place, it’s time to test the AC unit. Turn the unit on and make sure it is working properly. If your AC unit is still not working, it’s time to call a professional.
Top San Antonio Ac Repair
When your AC unit stops working, it is important to take the time to properly diagnose the issue before calling in a professional. By following the steps outlined in this guide, you can check the circuit breakers, thermostat, and filter for any signs of trouble.
At Beluga Air, we are committed to being the top San Antonio Ac Repair company you can trust. We strive to make sure that your AC unit is running at its best and that you are comfortable in your home. With our free professional diagnosis, you can trust that your issue will be accurately diagnosed and the proper repairs and maintenance will be applied.
Don’t wait until your AC unit stops working. Take the time to properly diagnose the issue and call Beluga Air for a free professional diagnosis. Our team of experts are here to help you get your AC unit back up and running quickly and efficiently.